Skip to content  

Werken bij de TU/e

PhD highly accurate, high bandwidth piezo driver (V36.4141)

PhD highly accurate, high bandwidth piezo driver

Aanstellingsfunctie(s)
Promovendus
Faculteit(en)
Faculteit Electrical Engineering
FTE
1,0
Sluitdatum
01/12/2019
Aanvraagnummer
V36.4141

Functieomschrijving

PhD position on a highly accurate, high bandwidth piezo driver at sub-nanometer scale for lithography and metrology.

Job description
This PhD position on a highly accurate, high bandwidth piezo driver for lithography and metrology is part of a larger multi-disciplinary project named:

“Advanced piezo-electric wafer stage for next generation lithography and metrology applications”.

In this project, in collaboration with the industrial partner ASML, in total four PhD candidates are aiming to demonstrate the feasibility of an advanced moving stage for holding silicon wafers in which light-weight and compact piezo-electric actuators are used. To enable the required high accuracy and speed, a new highly accurate piezo driver is required which shall provide an unprecedented positioning bandwidth.

The PhD candidate will investigate piezo crystals and develop the required power electronics as part of a positioning demonstrator system. The target is to make a sub-nanometer accurate positioning system featuring ppm level noise isolation from its environment. To do so, the deflection of the piezo crystal shall be linearized and the position loop bandwidth needs to be maximized. The candidate shall be able to tackle the physics of the piezo crystal, design self-sensing control, minimize piezo hysteresis, and implement the crystal-sensor-amplifier system in hardware to verify the design by measurement.

The PhD candidate will be based in the Electromechanics and Power Electronics (EPE) group in the Electronical Engineering department and will collaborate intensively with the other three PhD candidates in the project at the Electrical Engineering (optical and control systems) and Mechanical (system engineering) Departments as well as researchers of the industry.

The project, in collaboration with the industrial partner ASML, is also supported by the Eindhoven Engine, innovator accelerator in the Brainport region.

https://eindhovenengine.nl/ongoing-projects/advanced-piezo-electric-wafer-stage/

Electromechanics and Power Electronics group                                     

The EPE-group research activities span all facets of Electromechanics and Power Electronics, in particular advanced mechatronics systems with magnetically levitated linear and planar actuators, multi-level power converters and high-precision power amplifiers. The EPE group has a state-of-the-art 650m2 laboratory with multiphysical measurements (electrical, magnetic, and thermal):

It is a world leading group in the field of multiscale modeling and design techniques for high-precision electromagnetic motion systems with extreme dynamic performance indexes (accelerations, velocities, accuracy). The group carries out both fundamental and applied research and has many research collaborations with industrial partners. The group consists of 50 people of which 20 PhD students, 5 PostDocs, and 4 PDEng students.

Functie-eisen

We are looking for candidates with a MSc diploma in Physics, Applied Physics or Electrical Engineering with strong affinity in the physics of piezo-drives as well as the development of the required power electronics and strong knowledge of electrostatics and mechanical stresses. The selected doctoral student will be appointed in the Electromechanics and Power Electronics Group (https://www.tue.nl/epe). The candidate should have:

  • Demonstrated experience in the physics of piezoelectric effects and crystalline materials (like mechanical stress, hysteresis).
  • Experience in material analysis techniques with atomic resolution.
  • Experience in analog design.
  • Knowledge of control of non-linear processes.
  • Experience of PCB design optimized for EMC and thermal performance.
  • Strong skills in programming tools (Matlab, FEM packages, VHDL).
  • Knowledge of piezoelectric actuator design for applications in active vibration control is a plus.
  • Strong analytical and research capabilities.
  • Excellent communication skills.
  • Ability to independently organize his/her own work, to solve problems, to achieve desirable goals and to cooperate.
  • Work experience in multi partner international project environment is a plus.
  • Project management skills are also a plus.
  • Ability to participate in the teaching process in BSc and MSc programs (both taught in English).
  • Good scientific writing and documentation skills.
  • Strong command of the English language (knowledge of Dutch/German language is a plus).

Arbeidsvoorwaarden

  • Challenging job in a dynamic and ambitious university and a stimulating internationally renowned research environment.
  • Full-time temporary appointment for 4 years.
  • Gross salary between € 2.325,00 and € 2.972,00.
  • An extensive package of fringe benefits (e.g. excellent technical infrastructure, the possibility of child care and excellent sports facilities).

Informatie en sollicitatie

Information

  • For information concerning employment conditions you can contact Mrs. Tanja van Waterschoot, t.a.m.v.waterschoot[at]tue.nl.
  • For more information about the project, please contact the chair of the EPE group - prof.dr. Elena Lomonova, e.lomonova[at]tue.nl.
  • More information on employment conditions can be found here:  https://www.tue.nl/en/working-at-tue/why-tue/compensation-and-benefits/

Application

If interested, please use 'apply now'-button at the top of this page. You should upload the following: a detailed curriculum vitae including a complete list of the marks obtained during your whole university career, a letter of motivation and portfolio with relevant work. Recommendations will be requested upon the submission of the documents.

  • A cover letter explaining your motivation and suitability for the position;
  • A detailed Curriculum Vitae (including a list of publications and key achievements in research project(s);
  • Contact information of at least two references;
  • Copies of diplomas with course grades;
  • Graduation thesis.
     

Please keep in mind; you can upload a maximum of 5 documents of up to 2 MB each.